Re-Assembled Electrical Actuator Head 227SOLC
Description
The purpose of this discharge head is to actuate the valves of the cylinders on which it is fitted electro-mechanically. It will activate when the coil is energised, which will cause the solenoid to operate and actuate the valve. This actuator can be reset (pointer goes back to the stand by position) by threading a reset screw in its revolving nut.
The mechanism for fitting it to the cylinder valve using a swivel nut allows it to face the right direction.
All devices are to be installed in accordance with NFPA 70 “National Electrical Code” and with local electrical code requirements. If installation conditions require special protection, please contact Siex to discuss availability of suitably rated enclosures.
Specification
The 227SOLC electrical actuator head is connected to the upper actuation port of the RGS-MAM-11-4 / 12-4 valve and it can be to the side port of the container valve RGS-MAM-12-2C / 12-3C. The manual actuator head 227DM / 227DMS, cable-operated manual actuator head 227CMC, cable-operated manual actuator head with protective box 227CMCC, pneumatic actuator head 227CN / 227CNTK, pneumatic-manual actuator head 227CNM and the TK-SIMPLEX or TK-COMPLEX mechanical central can all be fitted to the 227SOLC actuator head.
NEED TO CALL
RIGHT NOW ?
No worries, you can call one of our Salesperson:
Andree Mark
Rendy Sastrapriady
NEED TO CALL
RIGHT NOW ?
No worries, you can call one of our Salesperson:
Andree Mark
Rendy Sastrapriady
© 2013-2024 | PT. Dinar Inti Duba
